<p>Vibrating feeder is also known as vibration feeder. In production process, vibrating feeder can uniformly and continuously feed block and particles shaped material from storage material warehouse to material receiving device. In gravel production line, vibrating feeder can uniformly and continuously feed materials to crushers and do rough screening on materials, so it’s widely used in breaking and screening joint equipment in metallurgical, coal mine, dressing, building materials, chemical, and other industries.</p><p>The feeding volume of vibrating feeder can be adjusted freely, and centralized control and automatic control of the production process can be achieved. Vibrating feeder can be used for feeding materials for belt conveyor, bucket elevator and screening equipment, feeding materials for crushers and grinder mills, for automatic packaging and so on, as well as used in automatic control process. The characteristics of vibrating feeder Vibration smoothly, reliable work, long life; It can adjust excitation force, change and control flow at any time, convenient adjustment stability; vibration motor as excitation source, and have low noise, jaw crusher, low electric consumption. It has regulation performance, no rush material phenomenon. The most important is that it has simple structure, reliable operation.</p><p>In order to guarantee the evenly and stable in the burdening and ration feeding of <a href="http://www.ft-productionline.com/proitem/p21.html">vibrating feeder</a> and prevent the flow automatically, the vibrating feeder should be installed in horizontal, if it process the common materials and feed materials continuously , it can install in the condition of slope down for 10°. For the sticky materials and high moisture content material , it can slop down 15°and then be installed. The installed vibrating feeder should have 20mm movable gap, the gap should be horizontal, the suspension system should adopts flexible connect.</p><p>concentrator table: http://www.fote-machine.com/product/sha … </p>